Data / Signal Systems > Combined Plug-In SPD
ZES 1M+4S TEL-NET USB HUB
Specification :
The extension ZES 1M+4S is intended for the protection of personal computer, peripheral appliances e.g.: monitors, printers, optical readers, CD-drives or amplifiers and multimedia devices (e.g. telephone, faximile, TV sets, Hi-fi's, DVDs etc).
ORDERING CODE 121 380?
The protection is functionally divided into power supply protection (230V~), telephone line protection and USB unit protection. Furthermore, there is also an overload protection fitted. The multimedia extension cord protects electronic devices against surges caused by lightning strikes, switching operations at larger electrical consumers, induction and other sources of overvoltage.
ZES 1M+5S
Specification :
The extension ZES 1M+5S is intended for the protection of personal computer, peripheral appliances e.g.: monitors, printers, optical readers, CD-drives or amplifiers and multimedia devices (e.g. telephone, faximile, TV sets, Hi-fi's, DVDs etc).

The protection is functionally divided into power supply protection (230V~), telephone line protection and TV protection. Furthermore, there is also an overload protection fitted. The multimedia extension cord protects electronic devices against surges caused by lightning strikes, switching operations at larger electrical consumers, induction and other sources of overvoltage.

Rated operating voltage: 230V AC / 50Hz
Max. permissible voltage: 250V AC
Input power: max. 2300VA
Rated current: max. 10A; Master outlet max. 2.5A, 575 W
Connection cable length: 1.8 m
Residual voltage Up(L-N) = 1KV
Hybrid pulse: Uoc = 3kV
Overload protection: 10A, 250V
Exit outlets Master outlet + 5 SHUKO outlets, 2 x RJ 11 telephone sockets, 2 x TV sockets

LED indication:
  • green LED - indication of voltage
  • green LED - indication of protection function
  • red LED - indication of slave function
ZES-6
Specification :
Plug-in surge protector ZES-6 is intended for the protection of household appliances. There is also an overload protection fitted. The ZES-6 protects electronic devices against surges caused by lightning strikes, switching operations at larger electrical consumers, induction and other sources of overvoltage.
ORDERING CODE 121 374?

Power supply protection
Power supply protection consists of varistors and gas discharge tubes. The varistors are additionally protected by thermal fuses which, in case of damage to the varistors, safely disconnect the protection from the network. In case of disconnection of power supply protection the supply and operation of the device is still assured, but not its protection. When protection is not engaged the green light will be off. In this case the plug-in surge protector should be replaced.

Overload protection
An integrated circuit breaker (fuse) provides protection against overloading. In case of overload the overloaded circuit will disconnect. After eliminating the overload you must press the RESTART button to re-activate the circuit. Therefore it will not be necessary to replace the fuse.

Designation: ZES-6
Rated operating voltage: 230V AC/ 50Hz
Max. permissible voltage: 250V AC
Input: max 2300VA
Rated current: 10A
Connection cable length: 1.8m
Residual voltage Up(L-N): 1KV Hybrid pulse
Uoc: 3kV
Overload protection: Circuit breaker
Socket type: 6 power sockets
LED indicator: signals operation and the existence of the protection conductor
Casing: Plastic material, self-extinguishing
Dimension: 406 x 61 x 42 mm (length x width x height)
Copyright© 2012 PT ABO MADALEX INDONESIA. All rights reserved.